class PTY

Creates and manages pseudo terminals (PTYs). See also en.wikipedia.org/wiki/Pseudo_terminal

PTY allows you to allocate new terminals using ::open or ::spawn a new terminal with a specific command.

Example

In this example we will change the buffering type in the factor command, assuming that factor uses stdio for stdout buffering.

If IO.pipe is used instead of PTY.open, this code deadlocks because factor’s stdout is fully buffered.

# start by requiring the standard library PTY
require 'pty'

master, slave = PTY.open
read, write = IO.pipe
pid = spawn("factor", :in=>read, :out=>slave)
read.close     # we dont need the read
slave.close    # or the slave

# pipe "42" to the factor command
write.puts "42"
# output the response from factor
p master.gets #=> "42: 2 3 7\n"

# pipe "144" to factor and print out the response
write.puts "144"
p master.gets #=> "144: 2 2 2 2 3 3\n"
write.close # close the pipe

# The result of read operation when pty slave is closed is platform
# dependent.
ret = begin
        master.gets     # FreeBSD returns nil.
      rescue Errno::EIO # GNU/Linux raises EIO.
        nil
      end
p ret #=> nil

License

© Copyright 1998 by Akinori Ito.

This software may be redistributed freely for this purpose, in full or in part, provided that this entire copyright notice is included on any copies of this software and applications and derivations thereof.

This software is provided on an “as is” basis, without warranty of any kind, either expressed or implied, as to any matter including, but not limited to warranty of fitness of purpose, or merchantability, or results obtained from use of this software.

Public Class Methods

check(pid, raise = false) → Process::Status or nil click to toggle source
check(pid, true) → nil or raises PTY::ChildExited

Checks the status of the child process specified by pid. Returns nil if the process is still alive.

If the process is not alive, and raise was true, a PTY::ChildExited exception will be raised. Otherwise it will return a Process::Status instance.

pid

The process id of the process to check

raise

If true and the process identified by pid is no longer alive a PTY::ChildExited is raised.

static VALUE
pty_check(int argc, VALUE *argv, VALUE self)
{
    VALUE pid, exc;
    rb_pid_t cpid;
    int status;
    const int flag =
#ifdef WNOHANG
        WNOHANG|
#endif
#ifdef WUNTRACED
        WUNTRACED|
#endif
        0;

    rb_scan_args(argc, argv, "11", &pid, &exc);
    cpid = rb_waitpid(NUM2PIDT(pid), &status, flag);
    if (cpid == -1 || cpid == 0) return Qnil;

    if (!RTEST(exc)) return rb_last_status_get();
    raise_from_check(cpid, status);

    UNREACHABLE_RETURN(Qnil);
}
getpty(*args)

Spawns the specified command on a newly allocated pty. You can also use the alias ::getpty.

The command’s controlling tty is set to the slave device of the pty and its standard input/output/error is redirected to the slave device.

env is an optional hash that provides additional environment variables to the spawned pty.

# sets FOO to "bar"
PTY.spawn({"FOO"=>"bar"}, "printenv", "FOO") do |r, w, pid|
  p r.read #=> "bar\r\n"
ensure
  r.close; w.close; Process.wait(pid)
end
# unsets FOO
PTY.spawn({"FOO"=>nil}, "printenv", "FOO") do |r, w, pid|
  p r.read #=> ""
ensure
  r.close; w.close; Process.wait(pid)
end

command and command_line are the full commands to run, given a String. Any additional arguments will be passed to the command.

Return values

In the non-block form this returns an array of size three, [r, w, pid].

In the block form these same values will be yielded to the block:

r

A readable IO that contains the command’s standard output and standard error

w

A writable IO that is the command’s standard input

pid

The process identifier for the command.

Clean up

This method does not clean up like closing IOs or waiting for child process, except that the process is detached in the block form to prevent it from becoming a zombie (see Process.detach). Any other cleanup is the responsibility of the caller. If waiting for pid, be sure to close both r and w before doing so; doing it in the reverse order may cause deadlock on some OSes.

Alias for: spawn
open → [master_io, slave_file] click to toggle source
open {|(master_io, slave_file)| ... } → block value

Allocates a pty (pseudo-terminal).

In the block form, yields an array of two elements (master_io, slave_file) and the value of the block is returned from open.

The IO and File are both closed after the block completes if they haven’t been already closed.

PTY.open {|master, slave|
  p master      #=> #<IO:masterpty:/dev/pts/1>
  p slave      #=> #<File:/dev/pts/1>
  p slave.path #=> "/dev/pts/1"
}

In the non-block form, returns a two element array, [master_io, slave_file].

master, slave = PTY.open
# do something with master for IO, or the slave file

The arguments in both forms are:

master_io

the master of the pty, as an IO.

slave_file

the slave of the pty, as a File. The path to the terminal device is available via slave_file.path

IO#raw! is usable to disable newline conversions:

require 'io/console'
PTY.open {|m, s|
  s.raw!
  # ...
}
static VALUE
pty_open(VALUE klass)
{
    int master_fd, slave_fd;
    char slavename[DEVICELEN];

    getDevice(&master_fd, &slave_fd, slavename, 1);

    VALUE master_path = rb_obj_freeze(rb_sprintf("masterpty:%s", slavename));
    VALUE master_io = rb_io_open_descriptor(rb_cIO, master_fd, FMODE_READWRITE | FMODE_SYNC | FMODE_DUPLEX, master_path, RUBY_IO_TIMEOUT_DEFAULT, NULL);

    VALUE slave_path = rb_obj_freeze(rb_str_new_cstr(slavename));
    VALUE slave_file = rb_io_open_descriptor(rb_cFile, slave_fd, FMODE_READWRITE | FMODE_SYNC | FMODE_DUPLEX | FMODE_TTY, slave_path, RUBY_IO_TIMEOUT_DEFAULT, NULL);

    VALUE assoc = rb_assoc_new(master_io, slave_file);

    if (rb_block_given_p()) {
        return rb_ensure(rb_yield, assoc, pty_close_pty, assoc);
    }

    return assoc;
}
spawn([env,] command_line) { |r, w, pid| ... } click to toggle source
spawn([env,] command_line) → [r, w, pid]
spawn([env,] command, arguments, ...) { |r, w, pid| ... }
spawn([env,] command, arguments, ...) → [r, w, pid]

Spawns the specified command on a newly allocated pty. You can also use the alias ::getpty.

The command’s controlling tty is set to the slave device of the pty and its standard input/output/error is redirected to the slave device.

env is an optional hash that provides additional environment variables to the spawned pty.

# sets FOO to "bar"
PTY.spawn({"FOO"=>"bar"}, "printenv", "FOO") do |r, w, pid|
  p r.read #=> "bar\r\n"
ensure
  r.close; w.close; Process.wait(pid)
end
# unsets FOO
PTY.spawn({"FOO"=>nil}, "printenv", "FOO") do |r, w, pid|
  p r.read #=> ""
ensure
  r.close; w.close; Process.wait(pid)
end

command and command_line are the full commands to run, given a String. Any additional arguments will be passed to the command.

Return values

In the non-block form this returns an array of size three, [r, w, pid].

In the block form these same values will be yielded to the block:

r

A readable IO that contains the command’s standard output and standard error

w

A writable IO that is the command’s standard input

pid

The process identifier for the command.

Clean up

This method does not clean up like closing IOs or waiting for child process, except that the process is detached in the block form to prevent it from becoming a zombie (see Process.detach). Any other cleanup is the responsibility of the caller. If waiting for pid, be sure to close both r and w before doing so; doing it in the reverse order may cause deadlock on some OSes.

static VALUE
pty_getpty(int argc, VALUE *argv, VALUE self)
{
    VALUE res;
    struct pty_info info;
    char SlaveName[DEVICELEN];

    establishShell(argc, argv, &info, SlaveName);

    VALUE pty_path = rb_obj_freeze(rb_str_new_cstr(SlaveName));
    VALUE rport = rb_io_open_descriptor(
        rb_cFile, info.fd, FMODE_READABLE, pty_path, RUBY_IO_TIMEOUT_DEFAULT, NULL
    );

    int wpty_fd = rb_cloexec_dup(info.fd);
    if (wpty_fd == -1) {
        rb_sys_fail("dup()");
    }
    VALUE wport = rb_io_open_descriptor(
        rb_cFile, wpty_fd, FMODE_WRITABLE | FMODE_TRUNC | FMODE_CREATE | FMODE_SYNC,
        pty_path, RUBY_IO_TIMEOUT_DEFAULT, NULL
    );

    res = rb_ary_new2(3);
    rb_ary_store(res, 0, rport);
    rb_ary_store(res, 1, wport);
    rb_ary_store(res,2,PIDT2NUM(info.child_pid));

    if (rb_block_given_p()) {
        rb_ensure(rb_yield, res, pty_detach_process, (VALUE)&info);
        return Qnil;
    }
    return res;
}
Also aliased as: getpty